Why Installations Aren’t As Bad As You Think

4 Stages To Do Hardwood Floor Refinishing Correctly When considering hardwood floor refinishing, homeowners have to know that along with planning and patience and skill, they ought to have specialized equipment as well. This project is something that requires research, knowledge and time out of all other home improvement projects that homeowners can have. You’ll be going through a series of steps or stages that include preparing, evaluating, sanding as well as sealing your hardwood floors. Even a slight touch of mistake is more than enough to cause problems that may last for a long time in any of the said stages or steps. Yes, you could refinish the entire hardwood flooring on your own but, it is recommended that you get some help at some stages. It takes 1 to 3 weeks to carry out refinishing for such type of flooring. Step 1. Checking the hardwood floor – you’ll have to determine whether or not the hardwood floor planks will be a laborious process. You have to assess if the floor suffered from water, pet urine or spills. You may pull up one threshold of the door in order to see if the boards are so thin to be sanded. In addition to that, it is vital that you find out if the last sealant was varnish, wax or polyurethane. You need to examine your hardwood flooring in order to see if they’ve got deep gouges or dramatic wear patters.
Smart Tips For Uncovering Resources
Step 2. Preparing the flooring – before you do hardwood floor refinishing, you must prepare the flooring first. If most of the hardwood planks don’t have scratches or holes, are at least 3/4 inches thick and have same amount of sealant, then you’re all set to start with the preparation.
Smart Tips For Uncovering Resources
The first thing that you have to do is to clean the entire floor area. You also have to file any holes from nails, staples or scrapes. You need to pull up the thresholds as well as the baseboards too. You need to do all the floors to keep it consistent even if one of the floors not looks good. Step 3. Sanding – this is probably the most daunting and the most demanding step that you would ever do. You’ll have to rent a drum sander equipment, it’s loud to use and you have to roll it on the entire hardwood flooring 3x to be able to peel off the top layer of the finish. Step 4. Staining and sealing – you need to be sure that every single bit of sawdust is gone so it doesn’t contaminate the sealing and staining applications before starting on this step. Once you’re done staining the floor, you now have to seal it with thin layer of sealant to be sure that the stain is dried completely prior to application.